The open cell bare electrode style FX-CLv2 amperometric chlorine analyzer gives you trouble free residual control and monitoring in virtually any water source, and excels in water that clogs chlorine sensor membranes, including wastewater.

Features

• Easy trouble free operation
• Accuracy of the amperometric method
• Continuous auto electrode cleaning promotes stability
• Variable speed buffer feed
• Quick Clamp pump head
• 4-20mA output of residual and temperature
• 24VDC microprocessor electronics
• Long lasting 24VDC stirring and pump motors
• No flow sensor and programmable alarm relays.
• Operating ranges from 0-1 ppm to 0-20 ppm are standard; high range chlorine up to 60ppm

FX-CL-T amperometric total chlorine analyzer gives you a hassle free, lower cost way to measure total chlorine residual.

Its continuous measurement and output is best suited for monitoring and process control in drinking water, wastewater effluent, sea water and pool water.

Stability, no need for pH sensor calibration and no chemicals to replace makes the analyzer a good choice for unmanned booster stations or anywhere that hands off operation is needed.

Features

The analyzer comes pre-assembled with everything needed on a 12″ x 24″ PVC panel.

User friendly interface and glass touch screen make it simple to commission, calibrate and use for typical operators.

Choice of sensor operating ranges: 0.05 – 0.5, -2, -5, -10 and  -20mg/l (ppm).

For convenience the 4-20mA output is automatically scaled when the operating range is set.

(2) 1A SPDT relays for high and low chlorine

All inputs and outputs are protected against over voltage.

The polycarbonate enclosure features a UV stabilized clear door to protect the touchscreen whether mounted indoors or outdoors. The cover panel swings out for easy field wiring access.

Options include temperature measurement and output, no flow alarm and data logging.

With two amperometric sensor options available, the FX-CLD analyzer can be optimized  to suit your particular water quality and application.

Features

The electronics in NEMA 4X fiberglass enclosure, sensor, flow cell and flow regulation are all mounted on a 12″ x 24″ panel for quick mounting and installation.

A 4.3″ full color glass touch screen displays concentration, alarm and processor status. Navigate the menu options by touching plain words instead of symbols or abbreviations.

Includes a single voltage protected 4-20mA output.

High and low residual alarms relays are SPDT dry contact rated at 1A. Actuation of programmable alarm levels can also be delayed up to 5 minutes.

Universal AC input from anywhere in the world is accepted without user selection, 88-264VAC, 50/60 Hz.

The 24VDC power supply and circuitry is protected by 6A fuse in the power entry module. The included 2-meter power cord connects to the analyzer via IEC #320-C13 connector and plant supply using a NEMA 5-15 connector.

FX-CLv2 General Brochure

FX-CLF General Brochure

CLT General Brochure

CLD General Brochure