DifferentialDifferential & Absolute
Integrated Ruggedized Pressure Transducer
The P24 Differential Pressure Transducer is the combination of a variable reluctance pressure transducer and a miniature carrier demodulator integrated into a single package to provide foroperation from mobile dc power and deliver a standardized dc output suitable for recording or telemetry.
P24 Absolute Pressure Transducer provides a sealed absolute reference cavity in the variable reluctance pressure transducer integrated into a single package with the miniature carrier demodulator. Electrically the P24 is a true four terminal device, the two output terminals being completely isolated from the two power input terminals. In addition, neither input common or output common are connected to case ground.
1280-1002 Mating Electrical Connector
T-140 Pressure Calibrator Kit
1. Mating electrical connectors are not furnished. They may be ordered by specifying the following part no.
2. O-rings are used on Gauge and Differential Units as pressure cavity seals, and for the pressure fitting adapters. On Absolute units, they are used for pressure fitting adapters only.
3. Any full-scale pressure value between the limits shown in Specifications may be called out, and in any popular engineering or scientific units. This value will be used to
calibrate the unit(s) and will be marked on each unit. The Validyne part number used on Packing List and Invoices will be as shown above, except that a two-digit
pressure range code will be substituted for the pressure range and units.
4. Gauge and Differential units are provided with two (2) fitting adapters and O-rings of the type specified: Absolute units with one each. To order spare fittings and/or O-rings, see the Model P24 Price List for part numbers and prices.
- General Specifications
|Standard Ranges||±0.08 to ±3200 psid F S 0.-0.08 to 0-3200 psia F S|
|Accuracy||±0.25% FS, including linearity, hysteresis, and repeatability. ±0.5% for absolute version.|
|Over-pressure||P24D: 200% F S up to 4000 psi maximum with less than 0.5% zero shift|
|Over-pressure||P24A: 20 psia or 200% F S whichever is greater up to 4000 psi maximum, with less than 0.5% zero shift|
|Line Pressure||3200 psig maximum (P24D)|
|Line Pressure Effect||Less than 1% F S zero shift/1000 psig|
|Pressure Media||Corrosive liquids and gases both sides, compatible with 410SS and incone|
|Outputs||±5 Vdc for ±F S, for differential; 0-5 Vdc for 0 to +F S for absolute (see ordering information for options)|
|Zero Adj.||±20% (nom.)|
|Span Adj.||0-100% FS|
|Temperature||Operating: -65°F to 250°F Compensated: 0°F to 160°F|
|Temperature Effects||Within 2% F S/100°F|
|Electrical Connection||PTO2A-10-6P, Bendix or equivalent. Mating connector PT06A-10-6S (SR) not furnished|