HOME > Pressure > Differential >

Differential

FIRST PREV ( Page 1 of 2 ) NEXT LAST

Differential
Ultra Low Range Pressure Measuremenet

The DP transmitters are designed for low pressure measurement in HVAC applications. They are available in full scale pressure ranges from 0.25 inH2O and to as low of 0.025 inH2O full scale. Both models are available in 4-20 mA or 0 to +5 Vdc signal output options.


Gauge & Differential
Strain Gage Output Pressure Transducer

The D/A Pressure Transducer is designed for direct application in DC strain gage instrumentation systems which require low pressure ranges not generally available in strain gage transducers. Functionally, it is a direct replacement for a strain gage transducer, providing a 5 mV/V nominal DC output over an excitation range of 5 to 12 Vdc.


Gauge & Differential Manometer
Portable and Self Contained Digital Pressure Manometer

The instrument is a portable, completely self-contained digital pressure manometer, available in absolute, gauge and differential ranges. In addition to the front panel liquid crystal digital display, the unit also provides a 2 Vdc analog output suitable or recording, remote display or control purposes.

Featured are an integral variable reluctance transducer, solid state electronics


Differential
High Line Pressure Transducer

The High Line Pressure transducer is designed to make low differential pressure measurements at high static line pressures. Operating from unregulated 9 to 55Vdc, It is available with 4-20mA, ± 5Vdc or isolated ± 5Vdc output over full scale pressure ranges from ± 5 to ± 10,000 psid. The output shift due to static pressure will not exceed 3% of full scale, up to a line pressure of 12,500 psig.


Differential & Absolute
Integrated Ruggedized Pressure Transducer

The Differential Pressure Transducer is the combination of a variable reluctance pressure transducer and a miniature carrier demodulator integrated into a single package to provide for operation from mobile dc power and deliver a standardized dc output suitable for recording or telemetry.


Differential
General Purpose Pressure Transducer

This is a compact differential pressure transmitter designed for industrial pressure measurement applications. The variable reluctance sensing technology allows the transmitter to be used in a wide variety of low pressure measurements where fast dynamic response, high resistance to vibration and superior signal stability through temperature change is required. It will accept both liquids and gases directly at the sensing diaphragm; there are no internal isolation fluids to slow the sensor response or cause temperature drift errors.


Draft Measurement
Precision Range Transmitter

The Draft Range Transmitter is designed exclusively for very low pressure measurement needs. It has a “true” full-scale range as low as ±0.25” H2O, making it ideal for air flow control applications. It can be turned down to ±0.1” H2O; higher full-scale ranges to ±100” H2O are available. The transmitter offers 0.5% accuracy and an operating temperature range of -20°F to +185°F. The total combined temperature effects are less than 3%/100°F.


Gauge
Variable Reluctance Pressure Sensor with All-Welded Construction

The Pressure Transducer, is designed for low and medium pressure measurements, to laboratory accuracy, of corrosive liquids and gases. In typical AC excited bridge circuits, this transducer delivers a fullscale output of 30 mV per volt at 3kHz. The unit operates with carrier system including the sine wave carrier demodulator and ther miniature DC input DC output carrier demodulator.


Differential & Digitally Compensated
High Accuracy Serial Pressure Transducer

The digitally compensated differential pressure transmitter designed for industrial pressure measurement applications. The on-board microprocessor provides high accuracy and improved stability in changing thermal environments. It is designed for a wide variety of low pressure measurements where fast dynamic response, high resistance to vibration and superior signal stability through temperature change is required. The transmitter will accept both liquids and gases directly at the sensing diaphragm.


Differential
Variable Reluctance Pressure Sensor

An easy-to-replace pressure-sensing diaphragm maximizes the system’s functionality by making pressure measurements from ±2.22” H20 to ±3200 psi in one compact unit. Rugged and reliable, the transmitter  provides superior accuracy for measuring low-pressure liquids and gasses, while it withstands the abuse of field and laboratory testing


Gauge & Differential
Ultra-Low Range Measurement

The Ultra Low range Pressure Transmitters are ideally suited for measuring extremely low liquid and gas pressures in industrial applications. Full-scale differential pressure ranges from 0.10” H2O to 2” H2O with line pressure rating of 100 psig, and ranges of 2” H2O to 3200 psid with line pressures up to 3200 psig are offered. Gauge pressure ranges start at 0.10” H2O and absolute pressure from 0.08 psia full-scale. This unique design, which utilizes a diaphragm-type variable reluctance pressure sensor, provides many outstanding advantages.


Differential
Digital Pressure Transmitter

The digital differential pressure transmitter is designed for industrial pressure measurement applications. The on-board microprocessor provides high accuracy and improved stability in changing thermal environments. Communication via RS485 serial interface provides remote zero and span adjustment as well as pressure readings in engineering units. ±5 Vdc or 4-20 mA analog output included.


FIRST PREV ( Page 1 of 2 ) NEXT LAST