Absolute & GaugeDigital Manometer
Differential, Gauge, or Absolute Digital display Pressure Monitor
The PS409 digital indicator and pressure sensor is ideally suited for test panels in industrial and laboratory applications where accurate low-pressure readings are required.
The panel-mount digital indicator with large 0.5 inch high, 4-1/2 digit LED display, provides a clear readout in three engineering units: PSI, In. Hg and In. H20, which can be selected from the front panel. The indicator also features separate calibration adjustments for meter display and analog output.
The transducer is available in absolute, gage and differential versions. It features corrosion-resistant materials at point of contact with the pressure media. With an easy-to-replace sensing diaphragm, gage and differential transducers can be configured to measure 23 pressure ranges from 0.08 psi FS to 3200 psi FS. In addition, the unit provides a 5 Vdc analog output suitable for recording, remote display or control purposes.
- General Specifications
|Line Pressure||3200 psig max. with zero shift less than 1% FS/1000 psi|
|Pressure Media||Any fluid compatible with Type 410 stainless steel and Inconel. Other materials available|
|O-rings||BUNA-N standard. Other materials are available|
|Pressure Cavity Volume||6 x 10-2 cu In.|
|Volumetric Displacement||6 x 10-4 cu in FS|
|Input Power||110 VAC or 220 VAC optional|
|Operating Temperature||0°F – 160°F (-17°C to 71°C)|
|Pressure Connections||1 /4” NPTF|
|Enclosure||3 /8 DIN rail mount|
|Signal Connection||Removable plug with screw terminals|
|Analog Outputs (gage or absolute)||Single, linear voltage output of 0 to 5 Vdc for Gage and Absolute versions|
|Analog Outputs (differential)||0 to 5V or ±5 Vdc. Special options and calibration available.|