HOME > Level > Liquids > Point-Level >Capacitance


Remote Housing for High Temp, Vibration, Hazardous Areas

The Pro Remote capacitance sensor features remote electronics located in a housing that is separated from the probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity. It offers simple, "Quick-Set" calibration and adjustable sensitivity to less than one picofarad, making it highly reliable in a variety of powders, solids, liquids and slurries.

It operates below the RF range at just 6 KHz – unlike competitive products that operate at 9 KHz or greater – so there is no interference to compete with two-way radios or other plant equipment. An LED on the electronics housing remotely indicates there is material in contact with probe. The PRO-Shield feature protects against false readings due to coating or material buildup on the probe, while an adjustable time delay of .25 to 10 seconds can be set to ensure the most accurate readings.


  • Point level detection and process control for solid, liquid and slurry materials
  • Used in bins, vessels, tanks, chutes, and conveyorswith high vibration/ temp conditions
  • Electronics can be located 75 ft. from sensing probe
  • Plastics, chemicals, coal/ fly ash, concrete, food ingredients, pharmaceuticals, feed/grain, mining, etc.
  • Quick-Set simple calibration
  • Unsurpassed sensitivity 0.5pF
  • PRO-Sheild compensates for material build-up
  • Operates belowRF range, temperature stable calibration
  • Fail-safe, switch selectable high/low
  • Adjustable time delay to 10 seconds
  • Optional sensing probes
  • Internal LED indicates material in contact w/ probe