AnalysisAysix Netmeter Omni
Multi-Function Real-time Networked Monitoring System
The NetMeter-OMNI continuously captures data from the attached sensors and stores it in the large built-in non-volatile memory for years’ worth of data history.
Multi-mode Flexible Inputs
In order to accommodate a wide range of sensor inputs, the NetMeter-OMNI enables each of the 8 input channels to be configured for either voltage or current mode.
In addition, each voltage/current input can be interpreted as binary (with pulse counting) using programmable thresholds, or as a high-resolution analog value.A built-in energy-storing device allows pulse counting to be maintained during blackouts for up to 12 hours with options for even longer blackout protection.
A self-contained web server inside the NetMeter-OMNI serves up a full featured user interface that may be accessed using a standard web browser: there is no need to install or maintain an application program on the user’s computer. Device setup is easy using the web interface. For pulse measurement, simply set the volume of water/air/gas/steam per pulse, define the units of measure, and cost per unit. For analog inputs (pressure, temperature, flow, etc.) the scale factor and offset may be defined for each channel.
Years of captured data can be stored in the built-in data logger. Logged and real-time data and can be viewed either graphically or numerically with sub-second updates for
- General Specifications
|Inputs:||8 multi-mode inputs|
|-||-voltage mode:0-24V with 1mV resolution|
|-||-Current loop mode :0120mA/4-20mA with 1uA resolution|
|Pulse mode operation||Either voltage or current mode|
|-||-Supports KYZ output mechanical meters|
|-||-Up to 24V pulses per second (400Hz),over a trillion counts(48bits)|
|Built in Webserver and Data Logger||10/100 Ethernet communication|
|-||User Freindly setuo to configure each input channel|
|-||16MB of flash memory for years of data retention|
|-||Documented API for custom applications to access data|
|Connections||Sensor Inputs:16 position screw terminals|
|-||Backup Power:2 positions screw terminals|
|-||Module Power :2 positions screw terminals|
|-||Ethernet :RJ45 connector|
|-||ZCAN expansion connector :RJ45|