The BM-30 LGX is a particulate monitoring device designed for general process and environmental monitoring. This particulate monitoring system consists of a control unit, a particulate sensor and a sensor coaxial cable. Applications for the BM3-LGX include continuous emissions monitoring, baghouse filter leak detection and process particulate flow monitoring. It detects many types of particulate including solid particulates such as dusts, powders, granulars and pellets as well as liquid particulates such as mists. Particulate monitoring helps a company meet regulatory requirements by detecting leaks before emissions are visible, and prevents the escape of valuable powders while providing a cleaner, safer workplace.
The BM-30 LGX employs a highly reliable technology based on induction. A sensor
probe is mounted in an airflow stream such as a pipe, duct or stack. As particulate flows near and over the sensing element, minute electrical currents are induced in the sensor and transferred to the control unit by a coaxial cable. A microprocessor filters and processes the signal into a normalized, absolute output that is linear to the mass concentration of particulate. The BM-30 LGX is CE conformant, CSA certified and complies with EN 61010, safety requirements for electrical equipment for measurement, control and laboratory use.
The control unit , which includes the electronics , is housed in a rugged, cast aluminum enclosure. An LCD displays particulate levels in bar-graph and digital forms. A lockable membrane keypad is provided for setup and adjustment of parameters. Various relay, analog inputs and outputs, as well as serial communications are available in the control unit. The particulate sensor is very durable and virtually maintenance-free. The sensor is passive with no active circuits, to ensure high reliability and durability. It does not require special alignment and is not affected by normal vibration. The cable that connects the particulate sensor to the control unit is a high-quality coaxial cable specifically designed for the BM-30 LGX system. The maximum cable length is 300 feet/91 meters making it ideal for a wide variety of installations.
- General Specifications
|CONTROL UNIT||115/230VAC 50/60Hz Standard, (6 watts max) 24VDC optional|
|Power Supply||5.0pA (0-5000pA) standard, 0.5pA (0 to 5000.0pA) optional|
|Resolution (range)||2 Relays ( SPST 5A@240VAC) standard, 1 isolated 4-20mA optional|
|Outputs||NEMA 4X Aluminum Standard, other options avail.|
|Enclosure||-13F (-25C) to 160F (70C)|
|Temperature||LCD with digital, analog & text display, 4-button membrane keypad|
|User Interface||Ordinary Locations (CE Approved) Standard; Ordinary Locations (CSA Approved for use with Class I, II, III Sensor|
|Area Classification||Circuit boards conformal coated for long life in harsh environments|
|General||NEMA 4X Aluminum Standard|
|SENSOR||3, 5, 10, 20, 30, 36 inch (Approximately 1/2 duct/pipe I.D.) Extended nipples & rope sensors for large multi-compartmental baghouses|
|Housing||NPT, Tri-Clamp or Flange|
|Probe Lengths||316 SS and Teflon or Ceramic Standard, Hastelloy Optional|
|Mounting||-40F(-40C) to 250F (120C) Standard, 450F (232C) Optional, 800 to 1600F Optional|
|Wetted Materials||10 PSI (0.69bar) Standard, 100 PSI (6.9bar) Optional, 1000 PSI (69bar) Optional|
|Process Temp||300 ft (100m) Maximum|
|Process Pressure||Ordinary Locations (CE Approved) Standard; Class I, II, III, DivI, II, All Groups (intrinsically safe, CSA Approved) optional|
|Sensor Cable||No special alignment, not affected by normal vibration|
|Area Classification||Any type >0.3 micron - Conductive, non-conductive, moist, corrosive|
|General||With 5.0 pA resolution - Approx. 5-10mg/m3 (standard leak detection); With 0.5 pA resolution - Approx. 0.5mg/m3 (monitoring and analysis)|