W series switchbox
W series switchbox is a simple switchbox with many features.
-Quick set cams, Push - Set - Release!
-Flat or Dome cover with indicator
-Several switch options, mechanical, gold plated or P+F sensors
-Additional terminals for solenoid, the box works as junction box.
-Low profile mounting
-ATEX EEx ia approved versions
- Cam shaft: AISI 304
- Housing: Aluminium, powder coated
- Screws, washers, springs, rings: AISI 303
- Covers, flat 01 & Dome 02: Polycarbonate, clear
- Cover flat 03: Aluminiun, powder coated
- Indicator 01 & 02: Nylon 01, Polycarbonate 02
- Indicator 03 Metal: Anodised aluminium
- Label: Polyester
- Plug: Nylon
XCL Series Switchbox
XCL series switchbox is designed to be directly and easily mounted onto actuators having connections according toNamur VDI/VDE 3845,
in order to reduce switchbox/actuator mounting time.
Bolt-on Dome indicator for high contrast wide angle viewing.A flat lid without indicator is also available.
Tool free adjustment of switch trip is accomplished simply by pushing or pulling the cam and rotating it to the new position.
Cams are spring-loaded and splined to maintain switch setting in any installed position.
ATEX approved Explosion proof ATEX II 2 G EEx d IIB T5
CSA approved Div.1, Cl.1, Group C-D, Div.1, Cl.2, Group E-G
Watertight protection IEC 529 IP67 / NEMA 4X
Limit Switches Multiple options available:
-Electromechanical, Amplified proximity, Namur proximity, SPDT, DPDT.
-Up to 4 pcs possible.
PS/PM Series Switchboxes
The PS/PM Series UltraSwitchTM provides accurate and reliable position signaling in harsh corrosive environments.
The engineered resin enclosure is provided with multiple switch options.
An UltraDomeTM indicator for visual position indication is standard with optional flat top for lower profile.
It is designed to be directly and easily mounted onto actuators for both rotary and linear indication. It may also be used as a
junction box for direct connection of solenoid valves.
With a housing of high strength and corrosion resistant fiberglass-reinforced engineered resin, Nylon PA6/PA66,
and pre-wired switches, it is both easy to install and withstands the toughest corrosive environments.
Nylon PA6/PA66 is used in a number of different high strength,abrasion and impact resistant thermoplastic polyamide formulations.
It offers excellent chemical resistance to common chemicals such as solvents, bases and salts.
Designed to meet IP66/NEMA 4/4X standards, the PS/PM UltraSwitchTM is certified for both Intrinsically Safe and
Non-Incendive hazardous locations.
ATEX Ex ia, FM IS, CSA IS, IEC Ex ia, FM NI, CSA NI
-ATEX II 1G Ex ia IIC T4/T5/T6
- IEC Ex ia IIC T4/T5/T6
-ATEX II 2 G Ex e mb IIC T5/T6
-FM IS Cl. l Div. 1 Grp. A, B, C, D; T4
-FM NI, CSA NI Cl. l Div. 2 Grp. A, B, C, D, D
-ATEX Ex ia, FM IS, CSA IS, IEC Ex ia