Wet-Wet Pressure Transducer
The DP303 is a true bidirectional, "Wet-Wet" differential pressure transducer designed for applications where very low differential pressures are to be measured in fluid systems involving high line, or working, pressures up to 5000 psig. Typical applications include core sampling studies, flow measurements in high pressure gas systems and null-sensing in hydraulic systems.
The DP303 features "take-apart" construction enabling the user to easily disassemble the unit for cleaning or to change full scale range by exchanging the sensing
diaphragm. As noted from the Pressure Range/Diaphragm Selection Chart on the reverse side of this Data Sheet, a family of interchangeable diaphragms are available to cover virtually any full scale pressure range from 0.08 psid full scale to 5,000 psid full scale—all rated for operation at 5,000 psig line pressure!
As all surfaces of the transducer which may come in contact with the fluid being measured are Type 410 stainless steel, Inconel or the cavity seal O-ring material—in both the positive and negative pressure cavities — a wide variety of corrosive liquids or gasses may be used without the need for add-on isolators and internal transfer fluids. For applications involving fluids not compatible with Type 410 Stainless steel, or the standard BUNA-N O-ring compound, the DP303 may be ordered with all wetted surfaces nickel or gold plated, and/or with alternative O-ring materials.
- General Specifications
|Standard Ranges||+/-0.08 psid FS to +/-5,000 psid, FS|
|Accuracy||.5% FS, including linearity, hystersis and repeatrability|
|Hysteresis||1/2% pressure excursion|
|Overpressure||500% FS or 7500 psi, whichever is less|
|Line Pressure||5,000 psig operating, zero shift 1% FS/1000 psi, 3% max.|
|Output||33 mV/V full scale nominal|
|Inductance||20 mH nominal, each coil|
|Zero Balance||Within 5 mV/V|
|Excitation||Rated: 5V rms, at 3 kHz to 5 kHz; Limits: 30V rms, at 3 Khz, 1kHz to 20kHz with 20 mH coils|
|Pressure Media||Corrosive liquids and gases both sides, compatible with 410sst, Inconel and BUNA-N|
|Temperature||Opterating: -65 F to 250 F; Specified: 0 F to 160 F|
|Thermal Zero Shift||1.0%FS/100 F Typical|
|Thermal Sensitivity Shift||2.0%FS/100 F Typical|
|Pressure Cavity Volume||4 x 10-3 cubic inch|
|Volumetric Displacement||3 x 10-4 cubic inch|
|Pressure Connections||1/8-27 NPTF female ports|
|Electrical Connections||PT02A-10-6P, Bendix or equal. Mating connector PT06A-106S (SR) not provided|
|Weight||2 pounds (0.91 kg)|