The SHT or Super High Temperature vibrating rod series is built specifically for higher process temperatures up to 482°F (250°C). It features a standard insulation tube that insulates the electronics from excessive heat. It has a standard insertion length of 7.24 inches for both top and side mount applications. It can be extended from 13 inches up to 13 feet using a rigid pipe extension for top mount applications where extra length is desired.
It has three sensitivity settings, does not require calibration, and can be used to detect extremely light, fluffy materials. It features BinMaster’s unique stainless steel single "rod" probe design that prevents bridging and build-up of material on the sensor. Other benefits includes a switch-selectable, high/low fail-safe and an auto sensing power supply compatible with 20 up to 250 volts AC/DC. Remote electronics – using BinMaster’s point level alarm panel – allow for readings from four up to 24 sensors from a single device.
- General Specifications
|Power Requirements||Universal Power Supply 24-250 VAC/VDC|
|Power Consumption||3 VA|
|Relay||SPDT 5A 250 VAC|
|Time Delay||1 second from stop of vibration, 2 to 5 seconds for start of vibration|
|Ambient Temp||-40F to 150F (-40C to 65C)|
|Process Temp||To 482F (250C)|
|Cable Entrance||1/2 inch|
|Enclosure||Die cast aluminum, NEMA 4, 5 & 12|
|Probe||304 stainless stee, (SHT-120 7.37 inch insertion length, SHT-120 14 in to 13ft insertion lentgth|
|Material Density||From 1.25 lb./cu.ft.|